Sometimes air conditioning units blow out hot air instead of cooling the room; which is not a normal issue at all. This issue can be a huge problem, especially during the hot summers. There are many reasons why an air conditioning system is not in its proper state. Read on to find out how to fix AC and the 8 common reasons why your AC is not cooling your room.
# Dirty Air FIlter :
The most common reason why your split and window AC is not cooling is because of unclean air filters. In such a case, air cannot flow through properly which reduces the cooling capacity of the air conditioner. The air filter has to be cleaned as soon as possible. If the AC filter is unclean or clogged with dust and dirt, it might result in various problems. Dirt in the AC filters blocks the passage of cool and warm air inside the ducts. It could also make the evaporator coil freeze, thus blocking the passage of cool air from the outlet. Contact a technician immediately to make air ducts clean.
# Coils Get Dirty :
Another reason may be the dirt and debris get clogged in the condenser coils. In an AC, the condenser is like a radiator that evaporates heat from the air and leaves the cold. The condenser coil must be clean to evaporate heat outside; when they get dirty it takes much time to make the atmosphere cool. Contacting an efficient technician is the most important work.
# Outside Unit Gets Dirty :
The evaporator absorbs heat from the air of the inside room and transfers it to the outside air conditioning unit. And a Condenser then condenses the hot air into cool air. A clogged condenser will not allow proper cooling of the air conditioning system. Debris and dirt will block even heat transfer. if the system is clean but could not deliver the proper coldness in the air; it must be a problem in the outer unit; immediate consultation with a technician is mandatory.
# Faulty Motors :
If the motor of the fan is either broken or faulty, the outdoor unit will be unable to dissipate heat, thus interfering with the cooling ability of an air conditioning unit. Do look into the matter as it will leave the air condition system in a useless state.
# Broken Compressor :
A compressor is the main part of an air conditioning unit that is responsible for cooling your room. If there is any problem found in the cooling capacity, the compressor might be defective. The compressor is a motor that compresses the refrigerant through the evaporator and condenser coils. If the compressor goes bad the cooling cycle does not start and the AC fails to cool. The problem is very big and a technician needs to be called immediately.
# Faulty Or Broken Thermostat :
A thermostat is a sensor that senses the room temperature and hints at the compressor to control cooling. If the thermostat is broken, the air conditioner may work differently.
# Low refrigerant level :
A refrigerant absorbs heat from the surrounding air, it is a kind of fluid and the insufficiency of this fluid will make a problem in cooling the air. Sometimes leaked refrigerants create problems in cooling down the air. Get your air conditioning service done at regular intervals to ward off this problem.
# The problem in AC Remote :
There can also be a situation when the remote fails to send temperature change signals to the AC unit. A simple replacement of a remote will be the solution.
To keep an AC working properly throughout it is advisable that you get your air conditioning unit serviced and maintained by an expert. Therefore, do take adequate care of the system, to decrease the possibility of expensive air conditioner maintenance charges and repairs. Do hire an AC service and repair professional company.